Figure 3.14 Wireless - 2.4Ghz > Advanced - Advantech EKI-6333AC-2G Series User Manual

Item
Short Guard Interval
Submit
Client Settings
The Client Settings as displayed in the following figure are available when the
operation mode (Wireless Network) is set to client.
To access this page, click Wireless - 2.4GHz > Advanced.
The following table describes the items in the previous figure.
Item
Client Settings
Roam
Watchdog
Watchdog Action
Disassociate Timer
Ping Target
Ping Waittime
EKI-6333AC-2G Series User Manual
Description
Click the drop-down menu to enable/disable the short guard
interval. In 802.11 operation, the guard interval is 800ns. The short
guard interval time is 400ns to allow for an increased throughput.
Click Submit to save the values and update the screen.
Figure 3.14 Wireless - 2.4GHz > Advanced
Description
Click to enable or disable the roaming function allowing it to
automatically switch to another AP with a better signal strength.
Click to disable the function, disassociate or ping a specific IP
address.
The function stops unsecured wireless LAN usage across the
network.

Disassociation: Transmits disassociation and
deauthentication frames to prevent client association.
Detected rogue WLANs.

Ping: The feature pings a specified IP address. If there is no
response to the pings, the AP performs one of the following
functions: Restart WiFi, Reboot, or Force Re-association.
Available when Watchdog is set to disassociate.
Click the drop-down menu to associate a response to the
Watchdog event, options: Restart WiFi, Reboot, Force
Reassociation.
Available when Watchdog is set to disassociate.
Available when Watchdog is set to ping.
Enter the IP address to target when watchdog ping is activated.
Available when Watchdog is set to ping.
Enter the value in seconds to designate the interval between
pings.
31