Table of Contents
Advertisement
When WAN Type (Network Mode) is Static, the Static WAN Type configuration
settings appear.
Figure 3.7 Interface > WAN > Network Mode > Static
The following table describes the items in the previous figure.
Item
Network Mode
WAN Interface
IP Address
Subnet Mask
Default Gateway
Static DNS 1
Static DNS 2
Submit
When WAN Type (Network Mode) is DHCP, the DHCP WAN Type configuration
settings appear.
Figure 3.8 Interface > WAN > Network Mode
The following table describes the items in the previous figure.
Item
Network Mode
WAN Interface
Submit
Description
Click the drop-down menu to select the mode type: Disable
(default), Static, DHCP, PPPoE.
Click the radio button to select the specific interface to configure.
Enter the WAN IP address given by your service provider.
Enter the WAN subnet mask given by your service provider.
Enter the WAN gateway IP address given by your service provider.
Enter the primary WAN DNS IP address given by your service
provider.
Enter the secondary WAN DNS IP address given by your service
provider.
Click Submit to save the values and update the screen.
Description
Click the drop-down menu to select the mode type: Disable
(default), Static, DHCP, PPPoE.
Click the radio button to select the specific interface to configure.
Click Submit to save the values and update the screen.
24
EKI-6333AC-2G Series User Manual
Advertisement
Table of Contents
