de
en
Immediately after that the coffee is brewed
and then runs into the cup or glass.
In the case of the strength settings
2x *
(AromaDouble Shot), the
appliance brews twice in succes
sion. Wait until the procedure is
fully completed.
Dried milk residue is difi cult to
remove, so clean the milk system
immediately after use (see
"Cleaning the milk system").
Two cups at once
1. Place two cups under the two coffee
outlets left and right:
2. Select
Espresso
rotary knob
turn the rotary knob
required strength.
3. Press
(3) to switch to the percup
>
quantity selection. In the percup quan
tity selection, keep turning the rotary
knob
(4) to the right until the display
shows
in front of the cup symbol:
2 x
Coff ee
4. Set the required quantity for the two
cups by turning the rotary knob
(small, medium, large).
5. Press
start stop (8).
Coffee is dispensed into the two cups.
42
TK76K573_Heft1.indb 42
or
with the
Coffee
(4). Press
(3) and
>
(4) to set the
*
2x
+
(4)
The appliance brews twice in
succession; wait for the complete
process to i nish.
My coffee
The
setting allows you to dei ne
My coffee
the exact mix of coffee and frothed milk that
suits your own individual taste.
1. Connect the milk tube to the milk frother
(see "Preparation using milk").
2. Place container with milk on the grate.
Introduce the milk tube into the contain
er. The notched end of the tube should
be fully immersed in the milk:
3. Place a cup under the coffee outlet (9).
4. Select
My coffee
(4).
My coff ee
5. Press
(3) to switch to the coffee
>
strength selection. Set the required
strength with the rotary knob
My coff ee
6. Press
(3) to go on to the percup
>
quantity selection. Set the required per
cup quantity with the rotary knob
*
1x
with the rotary knob
*
1x
(4).
*
1x
(4):
+
25.11.2011 16:01:59