Table of Contents
Advertisement
OPERATION (43221, 43226, 43230, 43237 & 43244)
1. Place wrench in the instrument and operate wrench in the desired direction. Remove wrench and zero
the display (if required) by pressing the red button located on the side of the instrument.
2. Place wrench in the instrument and operate wrench in the desired direction.
OPERATION (43227 & 43238)
1. Place wrench in the instrument and operate wrench in the desired direction.
Remove wrench and zero the display (if required) by pressing the red button located on the side of the
instrument.
2. Place wrench in the instrument and operate wrench in the desired direction.
Display shows first peak of torque applied. Serial data output of peak torque is automatically transmitted.
Serial Port
Connect lead (supplied) between TruCheck serial port and computer/ printer.
Communication settings: 9600 Baud, 8 data bits, 1 stop bit, no parity.
TECHNICAL SPECIFICATION
All 350 Nꞏm, 250 lbfꞏft, 1000 Nꞏm, 750 lbfꞏft and 2000 Nꞏm models
Display:
Display update rate:
Zero suppression:
Auto reset hold time:
AC power adapter:
Power consumption:
Weight:
Dimensions (mm):
Case materials / finish:
Electromagnetic Compatibility: In conformance with EN 61326-1.
Low voltage directive:
8
4 digit, 7 segment LED.
2 readings per second (2Hz).
± 2 least significant digits
2 seconds.
230 Volts AC at 50 Hz input (UK / Europe).
240 Volts AC at 50 Hz input (Australia).
120 Volts AC at 60 Hz input (USA / Canada).
100 to 240 Volts AC at 50-60 Hz input. (World).
6V, 300 mA DC output (centre positive).
1.8 W - maximum.
Instrument up to 400 N∙m capacity:
Instrument above 400 N∙m capacity:
Instrument up to 400 N∙m capacity:
Instrument above 400 N∙m capacity:
Self coloured rigid polypropylene case. Stainless steel transducer shaft and
zinc plated steel base plate.
In conformance with EN 61010-1.
3.2 kg shipping weight.
4.8 kg shipping weight.
145.5 (d) x 150 (w) x 85 (h).
145.5 (d) x 175 (w) x 85 (h).
- Quick Links:
- Calibration
Hide quick links:
Advertisement
Table of Contents
