Epson T3 Series Safety And Installation page 10

Control System Configuration
T series Manipulator system are configured by a combination of the following
software.
T3-401S
EPSON RC+ 7.0
T6-602S
EPSON RC+ 7.0
OK: Compatible All functions of the EPSON RC+ 7.0 and the Controller are
!!!: Compatible
viii
Before Ver.7.3.0
Ver.7.3.1 or later
Before Ver.7.3.3
Ver.7.3.4 or later
available.
Connection is OK.
versions or later.
properly.
T3-401S : EPSON RC+7.0 Ver.7.3.1
T6-602S : EPSON RC+7.0 Ver.7.3.4
Safety and Installation (T, VT / EPSON RC+ 7.0) Rev.15
Controller Firmware
Ver.7.3.51.1 or later
Controller Firmware
Ver.7.3.53.0 or later
It is recommended to use the following
Display or control may not be operated
!!!
OK
!!!
OK