Table of Contents
Advertisement
2.7 Jumper Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is "Short". If no jumper cap is placed on the pins, the jumper
is "Open". The illustration shows a 3-pin jumper whose pin1 and pin2 are "Short"
when a jumper cap is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
CPU PECI Mode Jumper
(3-pin PECI1)
PCI Express Graphics
Configuration Jumper
(3-pin PEG_CFG1)
Security Override Jumper
(3-pin SEC_OR1)
E3C246D4U2-2L2T / E3C242D4U2-2T
Normal Mode (Default)
CPU PECI connected to
PCH
Normal Mode (Default)
Descriptor Security
Override
ME force update
CPU PECI connected to
BMC (Default)
PCIE6 force @ x8 x8
(CPU Lanes x8 x8)
Not override (Default)
27
Advertisement
Table of Contents
