Preset Functions - Westinghouse WST3028 User Manual

Lightwave toaster oven
Table of Contents

Advertisement

Preset Functions

NOTE: All of the functions, except for the
toast function, are programmed with a
default time and temperature. The default
time may be changed by turning the
Time/Toast Color Dial. No preheat is
necessary.
1. Plug unit into a 120 V outlet. Place Wire
Rack into desired Shelf Position. Close
the Glass Door. The Operation Light and
the Display Window will illuminate while
the unit is plugged in.
2. Press the Function Button until the
pointer is next to the desired cooking
function.
3. The default time will appear in the
Display Window under the Timer section.
To change the time, turn Time/Toast
Color Dial to select the desired time. The
time will go up or down by 1 minute at a
time. The maximum time is 120 minutes
(2 hours).
Note: Some foods will cook up to 30%
faster than the package time. Set the
timer for lesser time, check food and
continue cooking if necessary.
4. Open the Glass Door and place your
food in the Lightwave Toaster Oven.
Close Glass Door.
5. Press the Start/Stop button. The Timer
will begin to count down and "min." will
flash in the Display Window.
6. Condensation may build-up on the
inside of the Glass Door, but will
evaporate during Preset Function.
7. The Lightwave Toaster Oven will beep 5
times when the program is complete.
8. Open the Glass Door. Using oven mitts
remove hot pan, Wire Rack and food.
Close Glass Door.
9. Unplug oven and allow to cool
completely before cleaning. See User
Maintenance Instructions. Unplug when
not in use.
NOTE: To change cooking time during
baking process, you must start the
programming sequence over. Press and
hold the Stop button until beep is heard.
The default time will appear in the
Display Window. Reprogram the time
and/or function and press the Start
button to resume the cooking process.
Hints For Cooking
• Heavy-duty aluminum foil may be used to
cover top of baking container to reduce
over browning. Tuck ends of foil closely
against edge of pan.
• Place food in the center of the Lightwave
Toaster Oven for better browning.
• Food may cook faster than recipe or
package time. Check for doneness prior to
end of cook time.
• Rotate and turn food over for more even
browning halfway through the cooking
process.
• To prevent heat loss, avoid opening the
Glass Door excessively.
• For best results, foods that contain a
leavening agent should be baked on the
lowest Shelf Position of the Lightwave
Toaster Oven.
• Always use the Broil Inserts and
Bake/Broil Pan with the Broil function.
10

Advertisement

Table of Contents
loading

Table of Contents