CAUTION: DO NOT IMMERSE ANY PRINTED WIRING ASSEMBLY MOUNTED ELECTRONIC
PARTS IN THE CLEANING SOLVENT; OTHERWISE, CIRCUIT BOARD AND/OR
COMPONENT DAMAGE MAY RESULT.
A.
Printed Wiring Assembly Cleaning
(1)
Remove dust, dirt, and foreign matter from all surfaces, using soft-bristle brush.
(2)
Wipe finished surfaces and contacts, using a cloth moistened in solvent.
B.
Connector Cleaning
(1)
Wipe dust and dirt from connectors, using a lint-free cloth, moistened with sol-
vent.
C.
Underwater Locator Device (Beacon) Cleaning
All information for the ULB, including the testing and cleaning, is contained in the
L−3AR Underwater Locator Beacon CMM, p/n 165E5542−00.
Use or disclosure of information on this sheet is subject
to the restrictions on the cover page of this document.
The document reference is online, please check the correspondence between the online documentation and the printed version.
AVIATION RECORDERS
COMPONENT MAINTENANCE MANUAL
FA2100CVR
23–70–04
Cleaning
Rev. 15 Page 402
Apr. 14/16