L3 FA2100 CVR Component Maintenance Manual With Illustrated Parts List page 156

NOTE:
(5) Attach the RIU Sound Card In (SND IN (J3)) cable to the Sound Card Line−In
(or Microphone−In) which is the blue connector.
(6) Attach the RIU Sound Card Out (SND OUT (J5)) cable to the Sound Card
Line−Out which is the green connector.
(7) Connect the DIN CABLE from the speakers to the middle Speaker Out (SPKRS
OUT (J6)) connector on the front panel of the RIU.
(8) After all connections are made to the RIU, apply power to the RIU. This can be
either 28 Vdc or 115 Vac, 400 Hz.
(9) Apply power to the PC or ROC/6 and observe that the PC boots to the Win-
dows desktop.
Use or disclosure of information on this sheet is subject
to the restrictions on the cover page of this document.
The document reference is online, please check the correspondence between the online documentation and the printed version.
AVIATION RECORDERS
COMPONENT MAINTENANCE MANUAL
FA2100CVR
Note: Make the following audio connections from the RIU to Sound
Blaster sound card. Note that the sound card is located in an expan-
sion slot not on the motherboard.
23–70–04
Testing & Fault Isolation
Rev. 15 Page 107
Apr. 14/16