L3 FA2100 CVR Component Maintenance Manual With Illustrated Parts List page 242

(3) Lift and disconnect the CSMU memory assembly as per the appropriate instruc-
tions below.
(a)
Recorder
Chassis
(1‐5)
Figure 303. CSMU Memory Assembly Removal Diagram (PRE-MOD DOT 6)
(b)
Use or disclosure of information on this sheet is subject
to the restrictions on the cover page of this document.
The document reference is online, please check the correspondence between the online documentation and the printed version.
AVIATION RECORDERS
COMPONENT MAINTENANCE MANUAL
FA2100CVR
For Pre-MOD DOT 6 units only, carefully tilt the CSMU memory assembly
to the left side (same side as cable) to gain access to the J1 connector
located on the Acquisition Processor PWA (1-175).
Carefully unplug P1 of the Memory Interface Cable Assembly from J1 on
the Acquisition Processor PWA. Note the pins of J1 can be easily dam-
aged if handled incorrectly.
Memory Interface
Cable Assembly
For Post-MOD DOT 6 / Pre-MODT DOT 13 units only, carefully tilt the
CSMU memory assembly to the left side (same side as cable) to gain ac-
cess to the J5 connector located on the Acquisition Processor PWA
(1-175).
Carefully unplug P1 of the Memory Interface Cable Assembly from J5 on
the Acquisition Processor PWA. Note the pins of J5 can be easily dam-
aged if handled incorrectly.
P1
Processor PWA
J1
CSMU
Memory Assembly
(1‐185)
Acquisition
(AP)
(1‐175)
23–70–04
Disassembly
Rev. 15 Page 305
Apr. 14/16