Klutch 62499 Owner's Manual page 11


Keep high-frequency source doors and panels tightly shut, keep spark gaps at correct setting, and
use grounding and shielding to minimize the possibility of interference.
ARC WELDING can cause interference!

Electromagnetic energy can interfere with sensitive electronic equipment such as computers and
computer-driven equipment such as robots.

Be sure all equipment in the welding area is electromagnetically compatible.

To reduce possible interference, keep weld cables as short as possible, close together, and down
low, such as on the floor.

Locate welding operation 100 yards from any sensitive electronic equipment.

Be sure this welding machine is grounded.

If interference still occurs, the user must take extra measures such as moving the welding
machine, using shielded cables, using line filters, or shielding the work area.
Shielding Gas Cylinders Can Explode!
High pressure cylinders can explode if damaged; treat them carefully.

Never expose cylinders to high heat, sparks, open flames, mechanical shocks or arcs.

Do not touch the cylinder with the electrode.

Do not weld on the cylinder.

Always secure cylinder upright to a cart or stationary object.

Keep cylinders away from welding or electrical circuits.

Use the proper regulators, gas hose, and fittings for the specific application.

Do not look into the valve when opening it.

Use a protective cylinder cap whenever possible.
⚠WARNING
Page 11 of 27