Elevator Chain Tension; Facilities To Be Provided By The User - Javo Quickfiller Manual

Elevator chain tension

Facilities to be provided by the user

Before the machine is delivered, the necessary materials and facilities (compressed air, power supply, potting
material, etc.) need to be easily available within 3 metres of the machine.
Power supply: 200 Volt, 1 Phase + Neutral + Earth. (N. America: 220 V 3 phase. 60 Hz).
Version 2011-4-1
The elevator chain tension is correct when it can move ± 20 mm in
the centre.
The tension can be adjusted using the two tensioning nuts on either
side of the elevator housing.
Tighten the nuts (A) equally on both sides of the elevator housing.
Note:
1. The chain tension must not be too tight.
Javo Quickfiller Manual
Page 10