Table of Contents
Advertisement
Assembly, installation and commissioning
Location
The machine should be placed on a flat surface, with sufficient load-bearing capacity. A Javo engineer should be
present during delivery of the machine to unload it from the truck.
Assembly / connection
Any loose components supplied together with the machine should be fitted to the machine. When doing so, ensure
that moving parts are not obstructed.
When the machine is fully assembled, it can be connected to the power supply (by a qualified individual) by inserting
the plug into the socket.
Setting-up / adjusting
The following points must be checked before starting the machine:
Covers and doors
All covers and doors must be closed and secured.
Type of soil
Depending on instructions.
Elevator direction of movement
The direction of movement of the elevator must be from bottom to top. The front of the elevator
(viewed from the soil bin) must move downwards. The covered side of the elevator must move
upwards.
If it is not, have an engineer correct this.
Soil belt tension
Version 2011-4-1
The tension is correct when the belt hangs down ± 40 mm in the centre.
The tension can be adjusted by turning the nuts (A) simultaneously.
The four bolts (B) on the block bearings must be loosened before turning these bolts.
The tension is correct when the belt hangs down ± 40 mm.
Javo Quickfiller Manual
Page 9
Advertisement
Table of Contents
