Turning Off The Lte Connection; Viewing The Lte Status - Motorola APX 7000 User Manual

6875952M01-NK
Advanced Features
2.18.3

Turning Off the LTE Connection

When and where to use: To extend the radio battery life, disable the LTE Connection when radio is
out of LTE coverage.
Procedure:
• Press and hold the preprogrammed LTE button.
The display shows LTE OFF to indicate the LTE connection is off.
2.18.4

Viewing the LTE Status

When and where to use: Here are the definitions of the temporary statuses of the LTE which are
shown on the radio top display.
Status shown
LTE NOT alternating
with READY
LTE CNTG
LTE CNTD
LTE alternating with
DISCNCTD
LTE alternating with
DISABLED
LTE OFF
NO LTE alternating with
SERVICE
LTE SVC alternating
with ERROR
LTE HW alternating with
ERROR
VPN AUTH alternating
with ERROR
LTE SVC alternating
with FATAL ER
34
3
Bring the radio to the qualified technician to check the issue if the error persists.
4
You can try to power on your radio again to reinitiate the LTE function. If this error persists, bring
your radio to the qualified technician to verify the issue.
78
Derivation and definition
LTE not ready
The LTE is busy.
LTE connecting
The radio is trying to connect to an LTE modem.
LTE connected
LTE communication is currently connected.
LTE disconnected
LTE communication is currently disconnected.
LTE disabled
LTE communication is currently disabled on the selected channel.
LTE off
LTE communication of the radio is currently off.
No LTE service
No LTE service detected at the current site.
3
LTE service error
There is an LTE service error.
3
LTE hardware error
There is an LTE hardware error.
VPN authentication error
Incorrect key installed for VPN.
4
LTE service fatal error
LTE function has come to a stall.
3