Viewing A Scan List; Viewing And Changing The Priority Status; Scan; Turning Scan On Or Off - Motorola APX 7000 User Manual

When the radio locks onto a channel in the Intelligent Priority Scan list, radio scans for higher priority
member within the same Trunking or Conventional system.
2.3.2

Viewing a Scan List

Procedure:
Turn the 16-Position Select Knob to view the members on the list.
2.3.3

Viewing and Changing the Priority Status

Procedure:
Press the Top Side (Select) button to change the priority status of the currently displayed
channel or the scan list status icon of the currently displayed channel.
The radio shows one of following priority status icons and scenarios:
• A Scan icon indicates that the current channel is in the scan list as a non-priority channel.
The LED lights up solid green.
• A Priority-One Channel Scan icon indicates that the current channel is in the scan list as
the Priority-One channel. The LED rapidly blinks green. You hear all traffic on the Priority-
One channel, regardless of traffic on non-priority channels.
• A Priority-Two Channel Scan icon indicates that the current channel is in the scan list as
the Priority-Two channel. The LED blinks green.
• No icon indicates that the current channel is deleted from the scan list.
2.4

Scan

This feature allows you to monitor traffic on different channels by scanning a preprogrammed list of
channels.
2.4.1

Turning Scan On or Off

Procedure:
Press the preprogrammed Scan button to toggle SCAN ON or SCAN OFF to initiate or stop scan.
If the scan is enabled, the display shows SCAN ON and the scan status icon.
If the scan is disabled, the display shows SCAN OFF.
2.4.2

Making a Dynamic Priority Change (Conventional Scan Only)

When and where to use:
While the radio is scanning, the dynamic priority change feature allows you to temporarily change any
channel in a scan list (except for the Priority-One channel) to the Priority-Two channel.
6875952M01-NK
Advanced Features
47