6875952M01-NK
Advanced Features
2.9.8
Testing the Man Down Feature
Prerequisites: Enable the Emergency feature with Silent Alarm disabled, but not in Surveillance Mode
before running this test on the radio.
Procedure:
1 Turn the radio on and place in the vertical position, for at least 5 seconds.
2 Lay the radio down in the horizontal position.
3 Wait for alert tone.
One of the following scenarios occurs:
•
The radio alerts with audible tone and displays MAN-DOWN.
•
If no tone is heard, make sure that the Man Down feature is enabled on your radio. If Man Down
feature was not enabled, please enable it and repeat
•
If the Man Down feature is enabled and no tone is heard, send the radio to a qualified technician.
2.10
Secure Operations
Secure radio operation provides the highest commercially available level of voice security on both
trunked and conventional channels.
By default, the radio automatically enters the encrypted environment without having to manually select
or clear the secure transmission.
2.10.1
Selecting Secure Transmissions
Procedure:
Turn the preprogrammed Secure/Clear switch to the secure position.
•
If the selected channel is preprogrammed for clear-only operation, when you press the PTT
button, you hear an invalid mode tone and the display shows CLR TX.
•
The radio does not transmit until you set the Secure/Clear switch to the clear position.
•
If the "Ignore Secure/Clear Switch when Strapped" programming option is enabled, the radio
transmits without displaying any messages in the strapped mode of operation, regardless of
the Secure/Clear switch setting. This option must be preprogrammed by a qualified radio
technician.
•
The Secure/Clear switch only applies when the radio is transmitting.
2.10.2
Selecting Clear Transmissions
Procedure:
Turn the preprogrammed Secure/Clear switch to the clear position.
•
If the selected channel is preprogrammed for secure-only operation, when you press the PTT
button, you hear an invalid mode tone and the display shows SEC TX.
•
The radio does not transmit until you set the Secure/ Clear switch to the secure position.
60
step 1
to
step
3.