Deleting A Nuisance Channel; Restoring A Nuisance Channel; Call Alert Paging - Motorola APX 7000 User Manual

6875952M01-NK
Advanced Features
This change remains in effect until scan is turned off. Scan then reverts to the default setting.
Procedure:
• Making a Dynamic Priority Change using the preprogrammed Dynamic Priority button:
a. When the radio locks onto the channel designated as the new Priority-Two channel, press
the preprogrammed Dynamic Priority button.
The radio continues scanning the remaining channels in the list.
2.4.3

Deleting a Nuisance Channel

When and where to use:
If a channel continually generates unwanted calls or noise (termed "nuisance" channel), you can
temporarily remove the unwanted channel from the scan list.
This capability does not apply to priority channels or the designated transmit channel.
NOTICE: Deleting a nuisance channel is only possible through the preprogrammed Nuisance
Channel Delete button.
Procedure:
When the radio is locked onto the channel to be deleted, press the preprogrammed Nuisance
Delete button.
The radio continues scanning the remaining channels in the list.
2.4.4

Restoring a Nuisance Channel

Procedure:
To restore the deleted nuisance channel, perform one of the following actions:
• Stop and restart a scan.
• Mode change to another channel and back to the original channel.
• Turn off the radio and then turn it on again.
Nuisance mode delete can be disabled by the system administrator.
2.5

Call Alert Paging

This feature allows your radio to work like a pager.
The radio which you missed its call can send a Call Alert page to your radio. The sender can also verify
if your radio is active.
NOTICE: This feature must be preprogrammed by a qualified radio technician.
48