Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 Content Introduction and safety ........................... 3 Intended use ............................3 General safety instructions for power tools..................3 Workplace Safety ..........................3 Electrical Safety ........................... 4 Safety of Persons ..........................4 Use and treatment of the power tool ....................5 Use and handling of the cordless tool ....................
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 Introduction and safety Never allow children or persons unfamiliar with these instructions to use the garden device. Children should be supervised to ensure that they do not play with the appliance.
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 Electrical Safety - The plug of the power tool must fit into the socket. The cap must not be changed in any way. Do not use adapter plugs together with grounded power tools. Unchanged plugs and suitable sockets reduce the risk of electric shock.
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 - Wear suitable clothing. Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts. Loose clothing, jewelry, or long hair can be caught by moving parts.
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 - Keep the unused battery away from paper clips, coins, keys, nails, screws, or other small metal objects that could cause the contacts to bridge. A short circuit between the battery contacts can cause burns or fire.
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 - Never use a device with damaged or missing parts. Have them repaired or replaced if necessary by a qualified specialist or workshop. - When working with or on the device, always wear sturdy shoes, long trousers, and the appropriate personal protective equipment (safety goggles, hearing protection, non-slip work gloves, etc.).
Page 8
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 - Hold the power tool only by its insulated grip surfaces, as the chain saw may come into contact with concealed power lines. Contact of the saw a live wire can put metal parts of the device under-voltage and lead to an electric shock with a live wire that can put metal parts of the device under-voltage and lead to an electric shock.
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 -Keep handles dry, clean, and free from oil and grease. Greasy, oily grips are slippery and lead to loss of control. - Only saw wood. Do not use the pole saw for work for which it is not intended. Example: Do not use the pole saw for sawing plastic, masonry, or building materials that are not made of wood.
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 After use - Turn off the device, remove the battery, and then place the device in a safe place. - Do not store the device within reach of children. - Make sure that the ventilation slots of the device are free of dirt.
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 - Vapors may escape if the battery is damaged or misused. Supply fresh air and consult a doctor if you have any complaints. The vapors may irritate the respiratory tract. - The liquid may leak from the battery if misused. Avoid any contact with it. In case of accidental contact, rinse with water.
Page 12
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 Figure 2: For maintenance and care 1. Lateral view of the chain saw 2. Motor, chain saw blade incl. chain and side cover incl. Chain tensioning sprocket 3. Set screw for chain saw oil...
Page 13
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 Figure 3: De-installation of the motor with cutting head from the telescopic linkage for space-saving storage or transport. Figure 4: Installing the battery...
Page 14
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 Figure 5: Using the telescopic extension Figure 5: Extension of the working area by 70cm Figure 6: Safety button and on/off switch for the use of the pole saw...
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 Switching the device on/off Insert the battery into the rail provided. Then push in the safety button (Figure 6, item 1) on the side, only then you can operate the on/off switch (Figure 6, item 2). The device now turns on. If you release the on/off switch, the device stops working.
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 - Saw off longer branches piece by piece. - When delimbing lying logs, always saw off the branches protruding freely into the air first. Do not cut off support branches until the log has been sawn in lengths.
Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 Recovery of raw materials instead of waste disposal. The device, accessories, and packaging should be recycled in an environmentally friendly manner. Plastic parts are marked for recycling according to type. WARNING! Do not throw batteries in the household waste, fire, or water.
Need help?
Do you have a question about the FX-E1HE20 and is the answer not in the manual?
Questions and answers