1. Manuals
  2. Brands
  3. Pulsar Manuals
  4. Power Supply
  5. PSACH 01246
  6. Instruction manual

Pulsar PSACH 01246 Instruction Manual

24vac/6a/1x6a ac power supply for 1 rotating camera, abs enclosure
Hide thumbs
1
2
3
4
5
6
Table of Contents

Advertisement

Quick Links

Download this manual
PSACH 01246
v.1.0
PSACH 24VAC/6A/1x6A
AC power supply for 1 rotating camera, ABS enclosure
EN
Edition: 3 from 02.09.2015
Supersedes the edition: 2 from 12.12.2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSACH 01246 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Pulsar PSACH 01246

Summary of Contents for Pulsar PSACH 01246

  • Page 1 PSACH 01246 v.1.0 PSACH 24VAC/6A/1x6A AC power supply for 1 rotating camera, ABS enclosure Edition: 3 from 02.09.2015 Supersedes the edition: 2 from 12.12.2013...
  • Page 2 PSACH01246 Features:  the 24V AC/6A or 27V AC/ 5,5A power output for  protections:  SCP short-circuit protection powering camera  power voltage 230V AC  OLP overload protection  OHP overheat protection  against tampering  IP65 ABS, hermetic enclosure ...
  • Page 3 PSACH01246 1. Technical description. 1.1. General description. supplying The AC/AC PSU intended for devices requiring voltage AC of 24V AC (U1= 24V AC/ U2= 27V AC) and total capacity of 6A@24V AC. It features protections: short-circuit (SCP), overload (OLP), transformer overheat (OHP).
  • Page 4 PSACH01246 1.4 Specifications: - electrical specifications (tab.2) - mechanical specifications (tab.3) - operation safety (tab.4) - operating specifications (tab.5) Electrical specifications (tab. 2). Mains supply 230V AC (-15%/+10%) Current consumption 0,75A max. Power frequency 50 Hz Power of the S PSU 150VA max.
  • Page 5 PSACH01246 2. Installation. 2.1 Requirements The AC/AC power supply is to be mounted by a qualified installer, holding relevant permits and licenses (applicable and required for a given country) for 230V/AC interference and low-voltage installations. The unit should be mounted in confined spaces, in accordance with the 2nd environmental class, with normal relative humidity (RH=90% maximum, without condensation) and temperature from -25°C to +40°C (table 5).
  • Page 6 WEEE separately. GENERAL WARRANTY CONDITIONS 1. Pulsar (the manufacturer) grants a two-year warranty for the equipment, counted from the device’s production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (the selection is at the manufacturer’s discretion) if the malfunction is due to the manufacturer, includes manufacturing or material defects, unless such defects have been reported within the warranty period (item 1).

Table of Contents