Configuring Advertisement Of The Management Address Tlv - H3C S6850 Series Configuration Manual

lldp tlv-enable basic-tlv { port-description | system-capability
| system-description | system-name }
By default, the nearest bridge agent advertises all supported basic management TLVs.
Only the nearest bridge agent is supported.
Configuring advertisement of the management
address TLV
About advertisement of the management address TLV
LLDP encodes management addresses in numeric or string format in management address TLVs.
If a neighbor encodes its management address in string format, set the encoding format of the
management address to string on the connecting port. This guarantees normal communication
with the neighbor.
You can configure advertisement of the management address TLV globally or on a per-interface
basis. The device selects the management address TLV advertisement setting for an interface in the
following order:
1. Interface-based setting, configured by using the lldp tlv-enable command with the
management-address-tlv keyword.
2. Global setting, configured by using the lldp global tlv-enable basic-tlv
management-address-tlv command.
3. Default setting for the interface.
By default:
The nearest bridge agent and nearest customer bridge agent advertise the management
address TLV.
The nearest non-TPMR bridge agent does not advertise the management address TLV.
Procedure
1. Enter system view.
system-view
2. Enable advertisement of the management address TLV globally and set the management
address to be advertised.
lldp [ agent { nearest-customer | nearest-nontpmr } ] global tlv-enable
basic-tlv management-address-tlv [ ipv6 ] { ip-address | interface
loopback interface-number | interface m-gigabitethernet
interface-number | interface vlan-interface interface-number }
By default, advertisement of the management address TLV is disabled globally.
3. Enter interface view.
interface interface-type interface-number
4. Enable advertisement of the management address TLV on the interface and set the
management address to be advertised.
In Layer 2 Ethernet interface view or management Ethernet interface view:
lldp tlv-enable basic-tlv management-address-tlv [ ipv6 ]
[ ip-address | interface loopback interface-number ]
lldp agent { nearest-customer | nearest-nontpmr } tlv-enable
basic-tlv management-address-tlv [ ipv6 ] [ ip-address ]
In Layer 3 Ethernet interface view:
13