Setting The Meter - Fora D40 Pro Operations & Procedures Manual

Setting the Meter

Before using your meter for the first time or if you
change the meter battery, you should check and
update these settings. Make sure you complete
the steps below and have your desired settings
saved.
Entering the Setting Mode
Start with the meter off (no test strip inserted).
Hold S.
1. Setting the date
With the year flashing, press M until the correct
year appears. Press S.
With the month flashing, press M until the correct
month appears. Press S.
With the day flashing, press M until the correct
day appears. Press S.
2. Setting the time
With the hour flashing, press M until the correct
hour appears. Press S.
With the minute flashing, press M until the correct
minute appears. Press S.
3. Setting the time format
Press M to select the desired time format ‒ 12h
(AM/PM) or 24h. Press S.
4. Setting the auto-send
Press M to select the auto-send "On" or "OFF".
Press S. This function is for the Bluetooth
transmission. If "On" is selected, your results will
be transmitted right after each test.
5. Deleting the memory
If you wish to delete ALL the results, press M
twice when you see "dEL" and a flashing "
the display. If you do not wish to delete the saved
results, press S to skip this step.
" on
11