Important Test Strip Information; Important Control Solution Information - Fora D40 Pro Operations & Procedures Manual

Important Test Strip
Information
● Storage conditions: 39.2°F to 104°F (4°C to
40°C), below 85% relative humidity. Do NOT
freeze.
● Store your test strips in their original vial only.
Do not transfer to another container.
● Store test strip packages in a cool dry place.
Keep away from direct sunlight and heat.
● After removing a test strip from the vial,
immediately close the vial cap tightly.
● Touch the test strip with clean and dry hands.
● Use each test strip immediately after removing
it from the vial.
● Write the opening date on the vial label when
you first opened it.
● Discard remaining test strips after 3 months.
● Do not use test strips beyond the expiration
date. This may cause inaccurate results.
● Do not bend, cut, or alter a test strip in any way.
● Keep the strip vial away from children since the
cap and the test strip may be a choking hazard.
If swallowed, promptly see a doctor for help.
For further information, please refer to the test
strip package insert.
Important Control Solution
Information
● Use only FORA control solutions with your
meter.
● Do not use the control solution beyond the
expiration date or 3 months after first opening.
Write the opening date on the control solution
vial and discard the remaining solution after 3
months.
● It is recommended that the control solution
test be done at room temperature 68°F
to 77°F (20°C to 25°C). Make sure your control
solution, meter, and test strips are at this
specified temperature range before testing.
● Shake the vial before use, discard the first drop
of control solution, and wipe off the dispenser
tip to ensure a pure sample and an accurate
result.
● Store the control solution tightly closed at
temperatures between 35.6°F to 86°F (2°C to
30°C). DO NOT FREEZE.
27