Setting The Meter - Fora Test N'GO Advance Pro Owner's Manual

Multi-functional monitoring system (blood glucose and b-ketone)

Table of Contents

Available languages

Setting the Meter

Before using your meter for the first time or if you change the meter

battery, you should check and update these settings. Make sure you

complete the steps below and have your desired settings saved.

Entering the Setting Mode

Start with the meter off (no test strip

inserted). Press UP and DOWN buttons

at the same time to enter Setting Mode.

1. Setting the date

With the year flashing, press UP/DOWN

button until the correct year appears.

Press MAIN.

With the month flashing, press

UP/DOWN button until the correct

month appears. Press MAIN.

With the day flashing, press UP/DOWN

button until the correct day appears.

Press MAIN.

2. Setting the time

With the hour flashing, press UP/DOWN

button until the correct hour appears.

Press MAIN.

With the minute flashing, press

UP/DOWN button until the correct

minute appears. Press MAIN.

Table of Contents

Table of Contents

Do you have a question about the Test N'GO Advance Pro and is the answer not in the manual?