Advertisement
Quick Links
zones
Installation Guides
Section:
ENCLOSURES
Description:
LEDGE SURFACE & SUPPORT KIT INSTALLATION - WITHOUT CABLE BOX
F1
H1
NOTE: Semi-Supported Screen (ZNFWS) shown as an example.
Ledge Surface & Support Kit (ZNFK36034SN) shown as an example.
Ledge Surface & Support Kit - Without Cable Box (ZNFK - Shelving Depth)
B
C
C
G1
Date:
May 2019
Page No:
1 of 7
ZNS_104a
Rev. No: 1
B
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Teknion Ledge Surface & Support Kit - Without Cable Box
Summary of Contents for Teknion Ledge Surface & Support Kit - Without Cable Box
- Page 1 zones Installation Guides Section: ENCLOSURES Date: May 2019 Page No: 1 of 7 Description: LEDGE SURFACE & SUPPORT KIT INSTALLATION - WITHOUT CABLE BOX ZNS_104a Rev. No: 1 Ledge Surface & Support Kit - Without Cable Box (ZNFK - Shelving Depth) NOTE: Semi-Supported Screen (ZNFWS) shown as an example.
- Page 2 zones Installation Guides Section: ENCLOSURES Date: May 2019 Page No: 2 of 7 Description: LEDGE SURFACE & SUPPORT KIT INSTALLATION - WITHOUT CABLE BOX ZNS_104a Rev. No: 1 Part and Product Identification A - Ledge Surface B - Ledge Surface- 17" Deep C - Ledge Surface- 15"...
- Page 3 zones Installation Guides Section: ENCLOSURES Date: May 2019 Page No: 3 of 7 Description: LEDGE SURFACE & SUPPORT KIT INSTALLATION - WITHOUT CABLE BOX ZNS_104a INSTALL CANTILEVERS TO SCREEN Allen STEP 1: Place the Cantilevers on Vertical Trims, one by one. Make sure Cantilevers are sitting on the top of the bottom trims. Tighten all the four set screws on the Cantilevers with allen key as shown.
- Page 4 zones Installation Guides Section: ENCLOSURES Date: May 2019 Page No: 4 of 7 Description: LEDGE SURFACE & SUPPORT KIT INSTALLATION - WITHOUT CABLE BOX ZNS_104a ASSEMBLE LEDGE SURFACES ASSEMBLE LEDGE SURFACES NOTE: Ensure that the Ledge Surface is placed on a clean surface. Pilot Holes STEP 2: Flip the Left and Right Ledge Surfaces upside down.
- Page 5 zones Installation Guides Section: ENCLOSURES Date: May 2019 Page No: 5 of 7 Description: LEDGE SURFACE AND SUPPORT KIT INSTALLATION - WITHOUT CABLE BOX ZNS_104a PLACE NOTCH COVERS NOTE: Notch Covers are placed only on the Top Brackets of the Cantilever Assembly. STEP 4: Place the Notch covers on the Cantilever Brackets as shown before installing the Ledge Surfaces.
- Page 6 zones Installation Guides Section: ENCLOSURES Date: May 2019 Page No: 6 of 7 Description: LEDGE SURFACE & SUPPORT KIT INSTALLATION - WITHOUT CABLE BOX ZNS_104a INSTALL LEDGE SURFACE ASSEMBLY INSTALL LEDGE SURFACE ASSEMBLY STEP 5: Install the Bottom Ledge Surface Assembly onto the Cantilevers first by using the STEP 6: Install the Upper Ledge Surface Assembly onto the Cantilevers by using the Machine Machine Screws provided.
- Page 7 zones Installation Guides Section: ENCLOSURES Date: May 2019 Page No: 7 of 7 Description: LEDGE SURFACE & SUPPORT KIT INSTALLATION - WITHOUT CABLE BOX ZNS_104a INSTALL LEG ASSEMBLY NOTE: When installing Leg Assembly, #8 Wood Screws (G2) are used only for the Top Ledge Surface & #10 Wood Screws (G3) are used for the Bottom Ledge Surfaces.
Need help?
Do you have a question about the Ledge Surface & Support Kit - Without Cable Box and is the answer not in the manual?
Questions and answers