Fujitsu PRIMERGY 19 User Manual page 40

Align the center of the M6 hexagon socket set screw of the bar nut for the hinge and the lock plates with the punch on
the aluminum frame.
4 Install the rack-side hinges, door stopper and lock plates.
・Using the bar nuts for the hinges installed in step 3, secure the rack-side hinges with M6 hexagon socket bolt to the
upper and lower parts of the frame.
・Use the M6 core spring nuts to install door stoppers to the upper and lower parts of the frame.
・Using the bar nuts for the lock plates installed in step 3, secure the rack-side hinges with M6 Flathead screws to the
upper and lower parts of the frame.
Con fir m t h a t t h e sh ield r u bber is attached to the upper and lower lock plates.
U pper door st opper : Th e sh ield r u bber sh ou ld be a lon g t h e t op.
Lower door st opper : Th e sh ield r u bber sh ou ld be a lon g t h e bot t om of t h e br a ck et .
5 Remove the door-side hinges.
・Remove the M6 hexagon socket bolt to remove the upper and lower door-side hinges.
H frame
M6 hexagon socket bolt
door-side hinge
40
H frame