Fujitsu PRIMERGY 19 User Manual page 32

Item
Product name
Type name
Appearance
Unit mounting
capacity
Size
(W x D x H)
[mm]
Maximum
Weight-bearing
Load (kg)
Door opening
ratio
Accessories
*1) Ensure that the floor load based on the total rack capacity does not exceed the floor strength
(withstand load) at the installation site (such as an office).
*2) The expansion rack is not equipped with a pair of side covers.
*3) Key operation is required for locking the door handle.
*4) The expansion rack is supplied without the Information (paper).
The base rack can be connected to an expansion rack, and the expansion rack can be connected to another expansion rack.
These racks cannot be connected to other series racks.
19-inch rack for PRIMERGY
(Wide/ 42U/ Base rack)
supports CX400 M4
PY-RBRCA3
Coated black (front and rear doors with punched metal finish)
42U
800 × 1200 × 2000
Total rack capacity: 990kg (*1)
Total load capacity: 840kg (excluding rack)
Rack: 150kg
80%
Items already attached to the rack when shipped
・Front door, rear door, and a pair of side
covers）
Items in their own packages when shipped with the rack
・Rack door key: 2 (*3)
・Cable holder (front): 10
・Cable holder (rear): 10
・M5 flat head screw and core spring nut: 20
of each
(for cable holder)
・Cage nut tool
・Protection bushing: 6
・Information (paper): 1
Specifications
19-inch rack for PRIMERGY
(Wide/ 42U / Expansion rack)
supports CX400 M4
PY-RBRCB3
Total rack capacity: 960kg (*1)
Total load capacity: 840kg (excluding rack)
Rack: 120kg
・Front and rear doors (*2)
・Rack door key: 2 (*3)
・Cable holder (front): 10
・Cable holder (rear): 10
・M5 flat head screw and core spring nut: 20
of each
(for cable holder)
・Connection kit: 1 set
・Protection bushing: 6
(*4)
32