Rack Configuration And Installation; Configuration - Fujitsu PRIMERGY 19 User Manual

3 Rack Configuration and Installation

3.1 Configuration

This section provides the specifications of the rack and its accessories.
Item
Product name
Type name
Appearance
Unit mounting
capacity
Size
(W x D x H)
[mm]
Maximum
Weight-bearing
Load (kg)
Door opening
ratio
Accessories
*1) Ensure that the floor load based on the total rack capacity does not exceed the floor strength
(withstand load) at the installation site (such as an office).
*2) The expansion rack is not equipped with a pair of side covers.
*3) Key operation is required for locking the door handle.
*4) The expansion rack is supplied without the Information (paper).
19-inch rack for PRIMERGY
(Wide/ 42U/ Base rack)
PY-RBRCA
Coated black (front and rear doors with punched metal finish)
42U
800 × 1200 × 2000
Total rack capacity: 990kg (*1)
Total load capacity: 840kg (excluding rack)
Rack: 150kg
80%
Items already attached to the rack when shipped
・Front door, rear door, and a pair of side
covers）
Items in their own packages when shipped with the rack
・Rack door key: 2 (*3)
・Cable holder (front): 10
・Cable holder (rear): 10
・M5 flat head screw and core spring nut: 20
of each
(for cable holder)
・Cage nut tool
・Protection bushing: 6
・Information (paper): 1
Specifications
19-inch rack for PRIMERGY
(Wide/ 42U / Expansion rack)
PY-RBRCB
Total rack capacity: 960kg (*1)
Total load capacity: 840kg (excluding rack)
Rack: 120kg
・Front and rear doors (*2)
・Rack door key: 2 (*3)
・Cable holder (front): 10
・Cable holder (rear): 10
・M5 flat head screw and core spring nut: 20
of each
(for cable holder)
・Connection kit: 1 set
・Protection bushing: 6
(*4)
31