Valeport miniSERIES Series Operating Manual page 15

· The data separator is a tab (this may be altered if required).
· Data is presented in the order: Pressure, Temperature, SV / Conductivity
· For the miniSVP and miniCTD, pressure data format is dependent on sensor range, and may be any of the
following. Leading zeroes are included, so it is a fixed length string:
- PPPP.P (e.g. 0123.4 dBar)
- PPP.PP (e.g. 012.34 dBar)
- PP.PPP (e.g. 12.345 dBar)
· For the miniTIDE, pressure data is a fixed length string, 3 decimal places, including leading zeroes.
· The temperature data (miniSVP & miniCTD) is given to 3 decimal places. Value is in °C and leading zeroes are
included; signed if negative:
- 21.456
- 02.769
- -01.174
· Sound Velocity (miniSVP) is given in m/s, as a fixed length string with 3 decimal places. In air, the sensor reads
0000.000
· Conductivity (miniCTD) is given in mS/cm, as a fixed length string with 3 decimal places, and leading zeroes if
appropriate.
Page 15
Data Requests and Output Formats
© 2019 Valeport Ltd