Setting - Ravelli Flexi 7 Use And Maintenance Manual

Pellet stove
Hide thumbs Also See for Flexi 7:
Table of Contents

Advertisement

COMFORT CLIMA
ENABLE COMFORT
RESTART DELTA
SHUTDOWN DELAY
COMFORT CLIMA
2
In the inactive phases (combined with the 3rd part of the display) indicates the state of the stove.
In the active phases, it indicates the operating power of the stove.
ENABLE COMFORT
In addition, by pressing the DOWN scroll button, you can display the power settings, that can be edited using the two scroll
RESTART DELTA
keys
UP/DOWN: The confirmation of any change takes place automatically within 3 seconds from the change or by pressing the con-
SHUTDOWN DELAY
firmation key. A sound signal indicates that the change has been confirmed.
COMFORT CLIMA
ENABLE COMFORT
The first setting allows the activation of the CLIMATE COMFORT function. This function is intended to ensure that the room tem
RESTART DELTA
perature set is maintained steady upon setting the maximum period of "X" minutes (SWITCH-OFF DELA Y: 5 MIN) before switch-ing
to ECO STOP phase. The STOVE maintains this state until the temperature drops below the set value (CLIMATE COMFORT DELTA:
SHUTDOWN DELAY
5°C). For example, with the room temperature at 21 ° C, the stove switches of f when this temperature is reached and restarts when
the temperature reaches 16°C (21°C - 5°C). You can also activate the function using an external thermostat, keeping in mind that this
3
does not include the value of hysteresis.
Press the key for several times until the Stand-by page is displayed.

Setting

Time and date setting
Below are the steps to follow, starting from the Home screen, to access the Home menu.
Below are given the steps for accessing the relative menu.
After following the above procedure
MANUFACTURER
ENGINEER
Press the key "access menu" to
access
the
MENU page
Settings > Enable thermostat
SETTINGS
DATE-TIME
Settings > Enable thermostat
ENABLE EXT. TH.
CONTRAST
FW VERSION
ENABLE EXT. T
ADJUST
LANGUAGE
Press the key
"confirm" to
access the
SETTINGS
Press the "enter" key
page
to access the
SETTINGS
ENABLE THERMOSTAT
Press the key
"confirm"
to enable the function.
Settings > Season
��
ENABLE EXT. T
In "Home" mode, instead of room temperature measured and settable, appears the line T ON if the room in which the
thermostat is installed has not reached the temperature requested or the writing T OFF if the temperature in the room is
reached.
Press the key
"confirm" to
access the
SETUP
SETTINGS
Use the UP/DOWN keys to change the WINTER/
SUMMER season. Function that can be set when
working with DHW puffer (Boiler).
See chap. Evolved hydraulic diagrams
Manuale uso e manutenzione S70- S90- SC90
MENU
USER
Press the key
"confirm"
to access the
USER page
Manuale utente PALMARE IDRO TOUCH RADIO
DATE-TIME
SEASON
CONTRAST
FW VERSION
Press the key "con-
LANGUAGE
firm"
ADJUST
to access the page
DATE-TIME
Press the key
"selection" to switch to
ENABLE THERMOSTAT.
Press the key for several
to return to
"STAND BY" page
DATE-TIME
SEASON
CONTRAST
FW VERSION
LANGUAGE
ADJUST
Press the key
"selection" to switch
to the function
CONTRAST.
ENABLE COMFORT
COMFORT CLIMA DELTA
SHUTDOWN DELAY
USER
SCREW FEEDING
CHRONOTHERMOSTAT
AIR-PELLET SET
STOVE STATE
DATE-TIME
ENABLE EXT. T
SEASON
CONTRAST
FW VERSION
LANGUAGE
ADJUST
In Stand-By mode, instead of room temperature measured
and settable, appears the line T ON if the room in which
Press the increase key to change every single value
the thermostat is installed has not reached the temperature
requested or the writing T OFF if the temperature in the
Press the increase key to change every single value
room is reached.
Press "confirm" to confirm the settings and switch to the next
value.
times
By pressing the key "back" for several times you will display
the stand-by page.
DATE-TIME
ENABLE EXT. T
SEASON
CONTRAST
FW VERSION
LANGUAGE
ADJUST
By pressing the following key you will confirm of data
and switch to the page within SETTINGS menu.
ENABLE COMFORT
Rev.0 18/05/2020
COMFORT CLIMA DELTA
SHUTDOWN DELAY
USER
COMFORT CLIMA
SETTINGS
Press the key "selection" for
"selection"
to switch to the second page
of USER MENU and select
SETTINGS.
Vers. 01 del 07/04/15
ENABLE THERMOSTAT
Press the key
"confirm"
to access the function
Press the key
"confirm"
to access the function
Pag.41
Pag.31
WINTER
SUMMER

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexi 9 decoFlexi 9 glassFlexi 9 steel

Table of Contents