EN
Rev.0 20/10/2022
Pag.86
⚠
Automatic switching on: the appliance is equipped with an automatic device that switches on the pellet without using other
⚠
igniters.
⚠
Avoid switching the appliance on manually if the automatic switching on system is compromised.
The first time the appliance is switched on, unpleasant odours or smoke can be generated due to the evaporation or drying
of some of the manufacturing materials. This will gradually disappear. During the first few uses, we recommend ventilating
the rooms well.
"Sealed" appliances
Every time the firebox door and/or pellet hopper are opened, avoid leaving them open for long periods of time to prevent the system
from notifying the status of open door and/or open hopper.
Setting the room temperature
By changing this value you define the temperature that you want to achieve in the room, read directly by a probe installed on the
appliance.
To change the temperature value, press
The settable values range from 5°C to 40°C.
Use and maintenance manual Block
or
.
Fig. 99