Srg-Xb25 - Sony SRG-XP1 Operating Instructions Manual

Note
When connecting this product to a network,
connect via a system that provides a
protection function, such as a router or
firewall. If connected without such
protection, security issues may occur.
 Reset switch
Press the switch for 5 seconds or longer to
return to the factory default.
 AUDIO IN terminal
Input for commercially-available MIC or LINE
to connect an audio device.
Tip
Switch between MIC and LINE input, as
indicated in "Connecting to commercially-
available microphones etc." (page 21).
 HDMI output terminal
Supplies the images as an HDMI video
signal.
 VIDEO OUT terminal
Supplies the images as a USB 3.0 video
signal.
Bottom
 Rating label
This label shows the name of device and its
electric rating.
Important
The product name and electric rating are
located at the bottom of the unit.
 Tripod mount
Use this to attach a tripod, etc.
For details, see "Attaching the camera to a
tripod" (page 16).

SRG-XB25

Front
 Tally lamp
Lights up in red when a tally command is
received or the camera is selected by an
optional remote controller (depending on
the setting mode). The brightness can be
selected from [HIGH], [LOW], or [OFF] (the
tally lamp does not light up) in [TALLY LEVEL]
in the SYSTEM menu.
 Lens
This is a 25x magnification optical zoom lens.
When [PIXEL ZOOM] in the ZOOM/FOCUS
menu is set to [ON], up to 2x zoom at 1080p
resolution, and up to 3x zoom at 720p
resolution is supported.
Used together with pixel zoom and digital
zoom, it achieves the equivalent of up to
150x telephoto performance.
Note
Do not touch the part around the lens when
energized.
 Ceiling mount
Use the screw holes when attaching to a
ceiling or other high location.
For details, see "Installing the camera in a
high location" (page 16).
9