Sony SRG-XP1 Operating Instructions Manual page 20

Using the VISCA RS-232 terminal
Up to 7 cameras can be connected via the VISCA
RS-232 terminal.
Note
The RM-IP500 cannot be connected due to lack
of a VISCA RS-232 terminal.
RS-232 cable
(supplied with RM-IP10)
RS-232 cable
RS-232 cable
Connecting multiple cameras using VISCA over
IP
When you connect multiple cameras to a single
remote controller or when you connect multiple
cameras to multiple remote controllers with a
computer, use a switching hub for the
connection.
Network cable
(commercially
available)
Network cable
(commercially
available)
Network cable
(commercially
available)
* Use a straight network cable.
20
Network cable
(commercially available)
HUB
(commercially
available)