Removing The Ni-488.2M Software (Optional) - National Instruments GPIB PCI-GPIB Getting Started

Removing the NI-488.2M Software (Optional)

© National Instruments Corporation
If you ever decide to stop using your PCI-GPIB board, you can remove
the board and the NI-488.2M software. To remove the NI-488.2M
software from the kernel configuration, you must have super-user
privilege and the driver must not be in use. Enter the following command
to unload the software:
pkgrm NIpcigpib
3-3
Chapter 3 Software Installation
PCI-GPIB for Solaris 2