Table of Contents
Advertisement
NI-488.2 Software Overview
© National Instruments Corporation
The NI-488.2 software, along with the GPIB-1284CT, transforms your
PC AT-compatible computer into a GPIB Controller with complete
communications and bus management capability.
The NI-488.2 driver is a dynamic link library (DLL) that loads when a
Windows GPIB application executes one of the NI-488.2 calls. The
NI-488.2 driver supports up to three GPIB-1284CT boxes connected to
three separate parallel ports.
The NI-488.2 software includes the following components:
•
Device driver
•
Hardware and software diagnostic utilities
•
Configuration utility
•
Interactive control utility
•
Software development utilities
•
Language interface libraries for Microsoft C and Microsoft Visual
Basic for Windows
•
Example programs that use the NI-488.2 API
1-5
Chapter 1
Introduction
GPIB-1284CT for Windows
Advertisement
Table of Contents
