3. Click
to close the
OK
4. Click
to return to the Home screen.
OK
Using Wireless Communication Hardware
Teachers using TI-Nspire™ Navigator™ Teacher software in the classroom
can use the wireless cradle along with the TI-Nspire™ access point to
establish a wireless connection between the teacher computer and any
TI-Nspire™ handheld. This section provides information about how to
attach wireless communication hardware to a TI-Nspire™ handheld.
Attaching a Wireless Cradle to a Handheld
The wireless cradles can also be used with all TI-Nspire™ handhelds to
wirelessly connect to the teacher computer. To connect a handheld to a
wireless cradle:
1. Slide the lock on the back of the cradle to the OFF position.
2. To attach the handheld, face the screen upward and slide the
handheld onto the top of the TI-Nspire™ Navigator™ wireless cradle.
Be sure that both sides of the handheld are inserted into both of the
.
side guides
76
Configuring Handhelds
dialogue box.
About
Lock in OFF position.