Ti-84 Plus Mode Cables; Capturing Screens In Ti-84 Mode - Texas Instruments TI-Nspire Getting Started

TI-84 Plus Mode Cables

If you already have TI-84 Plus handhelds and use the I/O port for
connectivity, use the same cables to connect to a TI-Nspire™ handheld
using the TI-84 keypad.
USB connection cable to
connect handheld in TI
mode to a computer using
TI-Connect software.
Connecting a TI-Nspire™ with TI-84 Plus Keypad to a TI-84
Plus Handheld
The TI-Nspire™ TI-84 Plus keypad I/O
link port is located at the bottom edge
of the keypad. The TI-84 Plus I/O link
port is located at the top left edge of
the graphing calculator.
1. Firmly insert either end of the I/O
cable into the port.
2. Insert the other end of the cable
into the other handheld's I/O port.

Capturing Screens in TI-84 Mode

To capture screens when using a TI-Nspire™ TI-84 Plus handheld, you
must use TI Connect™ Software. TI Connect™ Software is available for
both Windows® and Mac® systems and includes options for capturing
screen images, transferring files and updating operating systems. For
more information about TI Connect™ Software, visit the
education.ti.com website.
-
84
TI-84 Plus I/O handheld-to-
handheld connection cable
Working in TI-84 Mode 109