Working In A Ti-Nspire™ Navigator™ Teacher Software Classroom; Logging In - Texas Instruments TI-Nspire Getting Started

Working in a TI-Nspire™ Navigator™
Teacher Software Classroom
If you are in a classroom where TI-Nspire™ Navigator™ Teacher Software
is used, you will need to log in to class and answer questions sent to your
handheld by the teacher. The teacher can also pause and restart your
handheld. When paused, you will receive a message on your handheld.
You cannot use your handheld until the teacher releases the handheld
from pause mode.

Logging In

Complete the following steps to connect to a classroom session.
1. From the Home screen, press
~8
.
The
Login to Class
2. Type your user name and password
3. Click .
Login
TI-Nspire™ Handheld Login Status Icons
The icons on the TI-Nspire™ CX, TI-Nspire™ CX CAS, TI-Nspire™ and
TI-Nspire™ CAS handheld screens indicate the communication status
between the handheld and the access point, wireless adapter, wireless
cradle or TI-Navigator™ network. The icons indicate status as follows.
Icon Status
Blinking
Working in a TI-Nspire™ Navigator™ Teacher Software Classroom
5 5
dialogue box opens.
Meaning
The handheld is searching for an access
point.
. From an open document, press
57