Os Upgrade Messages - Texas Instruments TI-Nspire Getting Started

OS Upgrade Messages

This section lists the information and error messages that can be
displayed on handhelds during an OS Upgrade.
Shown on:
Sending handheld
Sending handheld
Sending handheld
Sending handheld
Sending handheld
Sending handheld
100 Updating the Handheld Operating System
Message and Description
"Receiver does not have enough storage
space. Make <xxxK> available."
This message indicates that the receiving handheld
does not have enough memory available for the
new OS. The space requirement is shown so you
know how much memory must be cleared for the
new operating system. Files can be moved to a
computer for storage to free the necessary space.
"Receiver must change batteries before
upgrading the OS."
This message indicates that the batteries in the
receiving handheld need to be replaced. Send the
OS Upgrade once the batteries are replaced.
"Receiver has a newer OS and cannot
This message indicates that the receiving handheld
has a newer OS version than the one being
transmitted. You cannot downgrade an OS.
"Upgrade not accepted by receiver."
This message indicates that the receiving handheld
refuses the upgrade.
"OS has been transferred.
You can now unplug."
This message indicates that the transfer is
complete and it is safe to unplug the cable from
the sending handheld.
"Sending OS. Do not unplug cable."
This message, along with a progress bar, is
displayed while the OS Upgrade is being
transferred.
load this OS."
OK
OK
OK