Milk Pump Calibration - WMF 5000S+ Operating & Cleaning Instructions

WMF DYNAMIC - OPERATING INFORMATION

MILK PUMP CALIBRATION

NOTE.
To perform milk calibration you will need a
measuring jug (min 600ml)
This process is used if you have a temperature
or level shift on ALL beverages.
STEP 2.
Then select the system menu.
STEP 4.
Remove hose from milk container.
STEP 1.
Select the menu on the top left of
STEP 3.
Select 'Quality check milk system'.
STEP 5.
Fill bllue cleaning container with cold water
and connect it back to milk line.
PAGE 01
VERSION. 1.2.18
the screen.