Setting - Roland V-Drums TD-27 Data List

SETTING

MEMO
Use the cursor [ ] [ ] buttons to move to settings such as SEND/FILTER and LIMITER.
PAD SEND LEVEL/FILTER
Here you can specify how the overhead applies for each pad.
Parameter
Pad Filter Select
Pad Send Level
[F5] button (H & R)
PRE LIMITER
This is a limiter/compressor applied before the sound is input to the overhead.
Parameter
Pre Comp Switch
Gain
Threshold
Ratio
Knee
Attack
Release
MIC SETTING
These are the overhead mic settings.
Parameter
Mic Type
Mic Width
Distance
Output Width
Value
BYPASS, 1–4
-INF–+6.0dB
H&R OFF, H&R ON
Value
OFF, ON
-24.0–+24.0dB
-60–0dB
1:1–100:1
HARD, SOFT1–3
0.1–100mSec
10–1000mSec
Value
TYPE1–4
0–4
0–6
DEFAULT, WIDE+1–+6
Explanation
Overhead input filter selection for each pad
BYPASS The input filter is not used; the sound is sent directly to the overheads.
1–4 The sound is sent to the specified input filter.
Depth of overhead for each pad
Specifies whether head and rim of instruments are selected as a set (ON) or independently (OFF).
Explanation
Turns the pre limiter on/off.
Output volume of the pre limiter
Volume level at which compression begins
Compression ratio
Attack of the sound at the moment compression is applied
Time from when the volume goes up the threshold level until the compressor effect applies
Time from when the volume falls below the threshold level until the compressor effect no longer
applies
Explanation
Type of mic
Distance between mics
Distance between the mics and the performer
Sense of space for the overhead sound
KIT EDIT
11