Mfx (Multi-Effects) - Roland Studio Canvas SD-80 Owner's Manual

Using the effects of the internal sound generator
Phase
Specifies the spaciousness of the chorus sound.
Pre Delay (Chorus Pre Delay)
Specifies the amount of time that is to pass after the original sound has been heard before the chorus
sound is heard. Increasing this value heightens the dispersal effect.
Type (Filter Type)
Specifies the type of filter.
Value
OFF
LPF
HPF
Cutoff freq (Cutoff Frequency)
Specifies the frequency at which the filter will begin cutting the specified frequency band.
Range:
When the Chorus Type is 2 (DELAY)
Center (Delay Center)
Specifies the delay time for the delay sound panned to the center.
Left (Delay Left)
Specifies the delay time for the delay sound panned to the left.
Right (Delay Right)
Specifies the delay time for the delay sound panned to the right.
HF Damp
Specifies the frequency at which the high-frequency portion will be cut for the delay sound that is
returned to the input. If you do not want to cut this sound, select BYPASS.
Range:
Feedback
Specifies the amount of feedback. Changing the amount of feedback will change the number of times that
the delay will repeat. Negative (-) settings will invert the phase of the feedback sound.
Center (Delay Center Level)
Specifies the level of the delay sound localized at the center.
Left (Delay Left Level)
Specifies the level of the delay sound localized at the left.
Right (Delay Right Level)
Specifies the level of the delay sound localized at the right.

■ MFX (Multi-effects)

This section explains how to select a multi-effect, and to edit the parameters that determine how the
multi-effect sound is produced and output.
MFX A-C Type (Multi-effect A–C Type)
Provides for selection among the 90 types of multi-effect. For details on the various effects that are
available, refer to MFX_E.pdf on the included CD-ROM.
MFX A-C Dry Send Level (Multi-effect A–C Dry Send Level)0–127
Specifies the level at which the signal processed by the multi-effect will be output.
46
0–180 degrees
0.0–100 ms
Explanation
The filter will not be used.
The frequency band above the cutoff frequency setting will be cut.
The frequency band below the cutoff frequency setting will be cut.
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 Hz
200–1000 ms, note value
200–1000 ms, note value
200–1000 ms, note value
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 Hz,
BYPASS
-98–+98%
0–127
0–127
0–127
0–90