Digital Trigger In - Roland V-Drums TD-27 Data List

DIGITAL TRIGGER IN

The first time that you connect a pad that supports digital connection to a DIGITAL TRIGGER IN port, you'll follow the screens that appear, and
specify the trigger input to which the connected pad is assigned.
Parameter
Pad
Assign
[F5] button (ADVANCED)
–
Position Adjust
XStick Detect Sens
Choke Sens
Bell Gain
Value Explanation
Refer to "Trig Type list" (p. 30). Selects the pad that is used.
Refer to "Trigger inputs
and playing methods Specifies the trigger input to which a digitally-connected pad is assigned.
corresponding chart" (p. 30).
Here you can make detailed settings for a pad that supports digital connection.
* The parameters that can be set differ depending on the type of pad.
Adjusts how the tonal character is affected by strike position.
1–10
Lower values adjust toward the center, and higher values adjust toward the circumference.
OFF, 1–5 Adjusts how easy it is to use cross-stick playing technique. If this is "OFF, " cross-stick technique is unavailable.
OFF, 1–5 Adjusts the sensitivity of choking technique. If this is "OFF, " choking technique is unavailable.
Adjusts the balance between the force of a strike on the bell (bell shot technique) and the loudness of the
0–3.2
sound. With higher values of this setting, a high volume can be produced even by a soft strike on the bell.
SYSTEM
31