Page 1
Matrix Sideboard Assembly Instructions - Please keep for future reference 614/0744 Dimensions Width - 80cm Depth - 40cm Height - 70cm Important - Please read these instruction fully before starting assembly Customer Helpline 08456 400800 If you need help or haved amaged or missing parts,call the Issue1-12/09/12...
Page 3
Components - Panels Please check you have all the panels listed below Glass Top x 1 Top panel x 1 Metal tube x 4 (80 x 40cm) (58.5 x 2.5cm) (80 x 40cm) Unfinished edge Unfinished edge Left side panel x 1 Right side panel x 1 (39.9 x 58.5cm) (39.9 x 58.5cm)
Page 4
Components - Fittings If you haved amaged or missing components, call the C ustomer Helpline:08456400800 Please check you have all the fittings listed below Note:The quantities beloware the correct amount to complete the assembly.In some cases more fittings may be supplied than are required. 55mm Screw x 8 45mm Cam pillar x 4 30mm Dowel...
Page 5
Assembly Instructions Step1 Attaching screws Assemble 4 pcs of screws onto top glass Step2 Attaching panel Assemble top panel onto top glass Step3 Attaching metal tube Assemble 4 pcs of metal tube onto the screw...
Page 6
AssemblyInstructions Assembly Instructions Step4 Attaching cam pillar Assemble 4pcs of cam pillars onto top panel Step5 Attaching door catch set Assemble door catch onto top panel Step6 Fitting dowel Insert 8 pcs of dowel into panel...
Page 7
Assembly Instructions Step7 Attaching cams Attach the top panel onto the side panel with cam to tighten. Unfinished edge Step8 Attaching screws Assemble 4 pcs of screws onto metal tube...
Page 8
Assembly Instructions Step9 Attaching panel Two people are required here. Assemble bottom panel onto panels & Assemble 4 pcs of screws onto bottom panel Unfinished edge Step10 Attaching foot Assemble 4 pcs of foot onto screws...
Page 9
Assembly Instructions Step11 Insert door assembly spring Insert 2 pcs of door assembly spring the top Insert 2 pcs of door assembly spring the bottom Step12 Attaching back panel Use screws to fix back panel otno the unit. Unfinished edge...
Page 10
Assembly Instructions Step13 Attaching shelf support Insert 4 pcs of shelf support in the proper position of panel Attaching shelf Attach the shelf onto unit. Step14 Attaching hinge set Attach part onto bottom board...
Page 11
Assembly Instructions Step15 Attaching door Please make sure the part as shown is the correct one for assembly at this stage. CAUTION: Before tighten the glass ,please with part ensure the part align to the edge of glass door Frosted side Step16 Attaching door Frosted side...
Page 12
Assembly Instructions Step17 Frostedside Attaching door Insert part into top panel Slide glass door into part onto bottom panel Before tighten the glass ,please with part ensure the part align to the glass door Step18 Attaching glass door Remove the underlying layer of the sticker and attach to the glass door at the positionas...
Page 13
Assembly Instructions Step19 Assembly is complete. MAX:20 kgs If you need help or haved amaged or missing parts,call the Customer Helpline: 08456 400800...
Need help?
Do you have a question about the Hygena 614/0744 and is the answer not in the manual?
Questions and answers