For Single Zone Variable Air Volume; Units - Trane Voyager Commercial Installation, Operation And Maintenance Manual

– Static pressure deadband - ________ Setpoint
– Discharge air temperature - _______Setpoint
– Morning warm up temperature - _______
Setpoint
– Exhaust Fan - _______ Setpoint
• Inspect the unit for misplaced tools, hardware and
debris.
• Verify that all unit exterior panels—including the
control panel doors—are secured in place.

For Single Zone Variable Air Volume

Units

Verify that the "Mode" selection switch and the "Zone
Temperature" setpoints are set and/or programmed at
the sensor modules.
RT-SVX34R-EN
The RTOM has input setpoint potentiometers inside the
control panel that are set at the factory which will allow
the unit to operate and maintain system control. For
specific job specifications:
• Verify that the control input potentiometers are set
according to the job specifications:
– DA Heat -_____Setpoint
– DA Cool - Fan SPD - _____Setpoint
– EXH Fan - _____Setpoint
• Inspect the unit for misplaced tools, hardware and
debris.
• Verify that all unit exterior panels—including the
control panel doors—are secured in place.
S S t t a a r r t t u u p p
107