Advertisement
Trada 2-leg
Step #4: adhere bumpers onto crossbars
Rubber bumpers help protect against worksurface damage and ensure smooth up-down operation. The bumpers are self-adhesive. Simply peel the
backing and press the bumpers into position.
• Adhere one round rubber bumper midway between the motor housings on each crossbar.
— Do not place a round bumper onto the exposed inner channel next to the motor housings.
• Adhere the remaining round bumpers next to each hole that could be utilized for attaching
the worksurface to the frame.
• Adhere one square rubber bumper next to the end through-hole on each inner channel.
round bumper
square bumper
Page 5
Assembly
Advertisement
