Advertisement
Trada 2-leg
Step #1: attach legs to crossbars
• Position the two legs and crossbars as shown.
— Position the exposed inner channel of the crossbars against the front of the right motor housing and against the rear of the left
motor housing.
• Using the 4mm Allen key, attach the crossbars to the motor housing with the M8x16 flat head socket screws (8 screws total).
— Tighten all screws securely.
CAUTION: Do not insert any object through the middle holes on the housing. Doing so can damage electronic components.
5mm Allen key
M8x16
flat head socket screw
Step #2: attach feet to legs
• Using the 4mm Allen key, attach the feet to the legs with the M8x16 round head socket
screws.
— Be sure the short end of each foot is toward the rear.
CAUTION: Do not interchange the flat head socket screws in step #1 with the round
head socket screws in step #2.
crossbars
rear
short end
toward rear
5mm Allen key
M8x16
round head socket screw
Page 3
no objects through
middle holes
Assembly
Advertisement
