Table of Contents
Advertisement
Purpose of the manual
This manual was written by the Manufacturer and is an integral part of machine equipment. During design and
construction the Manufacturer has carefully considered possible hazards and personal risks that may result from
interaction with the machine. In addition to observing the specific laws in force, the manufacturer has adopted all
"exemplary construction technique principles". The purpose of this information is to advise the users to adopt extreme
caution to avoid risks. However, discretion is invaluable. Safety is also in the hands of all the operators who interact
with the machine. Keep this manual in a suitable place, always within reach for consultation. The following symbols
are included to better stress some passages:
DANGER – WARNING: indicates hazards that may cause serious damages; attention is
INFORMATION: indicates particularly important technical information.
The following is enclosed with this manual:
-
Warranty certificate describing the Manufacturer's warranty conditions.
-
Documents that prove conformity with effective health and safety laws.
Contact the Authorised dealer for any service request, information or spare parts order.
Machine and manufacturer identification
Manufacturer Identification
Serial number
Machine model
Specifications
Safety information
-
Careful consultation of this manual before installation and use is essential. Continual observance of the
indications found in the manual guarantee personal and machine safety.
-
Never tamper with safety devices for any reason.
-
Strict observance of the work safety regulations issued by the responsible organisations in each country is
strongly recommended.
The manufacturer is not liable for damages to persons or things due to the neglect of safety regulations.
-
The personnel authorized to do the electrical connection must check that the characteristics of the power line
-
conform to what is indicated on the rating plate, that it is equipped with a circuit breaker and components that
comply with the current laws and regulations.
-
Correct machine placement, illumination and cleanliness are important conditions for personal safety.
-
Do not expose the machine to the elements.
-
Before installation, check that the chosen area is suitable, sufficiently lit, stable and has enough surrounding
space to facilitate cleaning and maintenance
-
Machine connections and start-up must only be performed by specialised technicians.
-
Make sure that the system specifications of the room where the machine is installed correspond to the
information printed on the plate.
-
Make sure the machine is connected to a grounding system.
-
The work area around the machine must always be kept clean and dry.
-
Use the garments foreseen by work safety regulations.
required.
Mark of Compliance
Year of construction
Advertisement
Table of Contents
