Advertisement
FIRST START
WARNING: Carefully read the safety notes.
1. Be careful when opening the packaging: Do
not use a sharp blade that could damage the
contents.
2. Remove the CURE M from the box by lifting
upwards.
3. Remove the foam panels from the top.
4. Keep the packaging, this guarantees safe
transport of the CURE M.
5. Put the CURE M on a secure surface; pay
attention to place it at a distance of at least 10
cm from any other object, including the back
wall. This procedure is essential in order to not
obstruct the vents of the CURE M's cooling
system. (See safety regulations)
6. Connect the power supply cable into both the
CURE M and a power outlet. You can use a
controlled switch outlet to disconnect the power
to the oven in an easy manner when not in use.
(See safety regulations).
7. After connecting the CURE M to the power a
brief start-up screen will appear and then go into
stand-by mode.
Warning: in this mode the CURE M is ready to
start the required program, it does not emit UV
rays but remains connected to the mains. (See
safety regulations)
CU RE M
PROGRAMS
The CURE M system has a microprocessor
controlled touch-screen interface and intuitive
software that allows you to control every aspect of
the drying process of your resin objects.
The CURE M system has three drying programs:
two for standard use to finalize small and large
products, and a third called Custom that allows
you to create a customized program for curing
your resin. All three programs use the controlled
emission of several very powerful 405nm and
365nm UV LEDs and the accelerating effect of
heat, thanks to the thermoregulation system. The
multiple action of the many UV emitters allows
the 360° irradiation of the piece without having to
rotate it.
Standard programs
From the power-on screen, it automatically
switches to the program screen. In this condition
the oven is powered and ready to start the program
chosen by the user.
Clear Program
The Clear program is designed for drying objects
produced with transparent and delicate resins. The
UV emission is reduced to 10% and the exposure
time is 20 minutes. The program starts by clicking
on the CLEAR icon.
CU R E M
Advertisement
