Inserting The New Wpt - JRC JAN-7201 Quick Reference

G
3 Click on the [New] button on the Route Planning bar.
4 Placing the cursor on the WPT0 position.
The latitude and the longitude of the WPT are displayed near the cursor.
5 Click the mouse button.
WPT0 is added.
6 Move the cursor and click the mouse button.
WPT1 is added at the cursor position.
7 Add as many WPTs as required in the same way.
8 After creating the last WPT, double-click the left button or right-click.
9 Save the route file that was created.
For the details of how to save the file, refer to "1.10 Saving the Creating Route".
【Editing the Created Route】
3 Click on the [Open] button on the Route Planning bar.
The [File operation] dialog box appears.
4 Select the route file to be edited and click on the [Open] button.
The route file is displayed on the [Route Planning] dialog box.
5 Set the route as indicated in Creating the New Route.
For the procedure, refer to "1.1 Starting the Route Planning".

1.2 Inserting the New WPT

T
1 Right-click on the WPT No. of the WPT to be inserted.
The context menu is displayed.
2 Click on [Insert WPT] of the context menu.
WPT is inserted following the selected WPT.
G
1 Click the left button on the leg between the WPTs in which a WPT is to be inserted.
The leg is set to a selected state.
2 Determine the insertion position of the WPT, and click to move the cursor.
A WPT is added.
9