8.
Use (A) and (D) to move the pointer to
[EXECUTE].
To cancel data deletion, move the
●
pointer to [CANCEL].
9.
Press (C).
This displays a confirmation screen.
10.
Use (A) and (D) to move the pointer to
[YES] or [NO].
11.
Press (C).
After the data delete operation is
complete, [DELETE COMPLETED] will
appear for a few seconds, and then the
Notification Mode screen will re-appear.
Timer
The timer counts down from a start time
specified by you. The watch performs a sound
and/or vibration operation when the end of the
countdown is reached.
The sound and/or vibration alert operations
●
will not be performed while battery power is
low.
Operation Guide 3481
Setting the Timer Start Time
The start time can be set in 1-second units up
to 60 minutes.
1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the number of timer repeats
(1 to 20) setting screen.
Number of repeats
3.
Use (A) and (D) to specify the number of
timer repeats (Auto Repeat).
4.
Press (C).
5.
Use (A) and (D) to specify the position of
the timer in the sequence.
6.
Press (C).
This moves the cursor to the minutes
setting.
7.
Use (A) and (D) to change the minutes
setting.
Minutes
8.
Press (C).
This moves the cursor to the seconds
setting.
9.
Use (A) and (D) to change the seconds
setting.
10.
Press (C).
11.
Use (A) and (D) to select whether or not
you want to save your current settings.
[YES]
[NO]
[RETURN]
12.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timer Mode
screen will re-appear.
Timer sequence
Note
To exit the timer setting operation at
●
any point, press (E) and advance to
step 11.
Using the Timer
1.
Enter the Timer Mode.
l
2.
Use the operations below to perform a
timer operation.
●
●
3.
Press any button to stop the sound and/or
vibration operation.
Seconds
Saves current settings.
Discards current settings.
Returns to the number of
repeats setting.
Navigating Between Modes
Start
C
(Countdown starts)
Pause
C
C
Resume
(Time up)
The watch performs a sound and/or
vibration operation for 10 seconds
when the end of the countdown is
reached.
You can reset a paused countdown to
its start time, by pressing (E).
19